NETio --- Wireless I/O
 

Features:

• Directly Address I/O using protocols such as MODBUS, MODBUS/TCP, DF1, Ethernet/IP, and DNP3 from a growing protocol library (note: check on protocol availability)
  
   

• Supports concurrent serial and IP/Ethernet payload communication for a separate RTU, PLC, or other device
  
   

• Stack modules together for scalable I/O or extend I/O module 1500 ft from remote radio with WeXP wireless

• Reduce wiring, termination and labor costs between devices/machines/controllers
  
   

• Reduce integration, configuration, and support costs
  
   

• Easily configured and implemented solution
  
   

• Wireless communication up to 20 miles

I/O Extension
 

Protocol Literacy

 

• Replace long wire runs between PLC/RTU and field devices (i.e., Analog Input from pump wired to remote radio. Then, transmits wireless to base radio.  Analog Out from base radio into PLC/RTU)

• Master radio can be TransNET, EntraNET, iNET, or x710 radios

• Concurrent IP/Ethernet and serial communications